How to Remove A Shower Head That Is Glued On?

Photo of author
Last Updated:

A showerhead can be stuck due to mineral deposits or rust, which forms over time. In some cases, previously applied glue could be a possible reason for getting your showerhead stuck.

Usually, showerheads are not glued on.

A Showerhead is fitted to the shower arm with a normal screw or ball joint. But sometimes, homeowners apply glue so that the head points toward a fixed direction. This is normally done to fix some issues in the fitting. However, It is not recommended.

Glue can become challenging to deal with if used to join a showerhead with a shower arm. As a result, you will face difficulties removing the stuck showerhead to replace it with a new one.

Fortunately, you can fix this mess on your own. In this guide, you’ll know a step-by-step approach to remove a showerhead that is glued on.

Let’s get started!

Safety & Tools Before Removing A Shower Head

It is recommended to take safety precautions when removing a showerhead that is glued on. Following are some key points to remember:

  • Wear Gloves to protect hands from injury as well as skin to come in contact with germs.
  • Wear Protective Eyewear such as goggles to covers your eyes from dust.
  • Turn off main water supply at your home to prevent yourself from getting drenched.

Also, Gather all the essentials before jumping into the process. For removing a glued shower head, you will need the following: Lemon Juice, Hot Water, Acetone Remover, Toothbrush, Adjustable Wrench, and an old cloth.

How to Remove A Shower Head That Is Glued On (Step By Step)

Step 1: Apply Pressure On the Glue

Apply Pressure On the Glue

First, you have to apply little pressure on the glued area so that glue starts to peel off. This can be done by twisting the shower head gently. Remember, applying force could result in damaging the showerhead.u003cbru003e u003cbru003eOur goal is to loosen the connection between the glue and the showerhead. It won’t entirely remove the glue but benefits in proceeding with the second step.

Step 2: Prepare A Lemon Juice Solution

Prepare A Lemon Juice Solution

Create a solution using lemon juice and hot water. This solution will dissolve the glued area so that it becomes easy to pull off the showerhead.u003cbru003eu003cbru003eTo create this solution, take two lemon slices and squeeze them into a container filled with a half-liter of hot water. Once the solution is ready, fill it into a bucket.

Step 3: Soak the Shower Head with Solution

Soak the Shower Head with Solution

Now, keep your showerhead submerged into the bucket filled with lemon juice solution. You can keep it like that for about 30 minutes and let the solution soak and dissolve the glue entirely.u003cbru003eu003cbru003eThe above process works if you have your shower arm detached from the wall connection. u003cbru003eu003cbru003eIf you have your u003ca href=u0022 target=u0022_blanku0022 rel=u0022noreferrer noopeneru0022u003eshower armu003c/au003e attached to the wall, take a plastic bag filled with the solution and hang it in such a way, the head gets submerged into it. You can also take the help of a rubber band or plumbing tape to tighten the bag.u003cbru003eu003cbru003eLet it soak and dissolve the glue.

Step 4: Clean u0026amp; Apply Acetone Remover

Clean & Apply Acetone Remover

After 30 minutes, remove the showerhead from the solution. You will notice some glue residue like stains and debris, so properly rinse and clean it with hot water. u003cbru003eu003cbru003eTo deal with stickiness, apply some u003ca href=u0022;dchild=1u0026amp;keywords=acetoneu0026amp;qid=1631258590u0026amp;sprefix=ace%2Caps%2C458u0026amp;sr=8-2u0026amp;linkCode=ll1u0026amp;tag=fixnclean-20u0026amp;linkId=fee025ec03156efcbfac4ea44f88b479u0026amp;language=en_USu0026amp;ref_=as_li_ss_tlu0022 target=u0022_blanku0022 rel=u0022noreferrer noopeneru0022u003eacetone removeru003c/au003e around the glue area. Acetone is an organic solvent that works effectively to remove glue and sticky residues.u003cbru003eu003cbru003eIf you have nail polish remover at home, you can use that as well. Just spray around the glue area of your showerhead and rub that area with a toothbrush. u003cbru003eu003cbru003eThis will brush out all the leftovers.

Step 5: Unscrew Showerhead u0026amp; It’s Done

Unscrew Showerhead & It's Done

For the last step, take an u003ca href=u0022;crid=YMLPDOORBHJUu0026amp;sprefix=adjustable+w%2Caps%2C596u0026amp;linkCode=ll2u0026amp;tag=fixnclean-20u0026amp;linkId=7e526805dfe9e2c9c0d9a2f1f432bc5eu0026amp;language=en_USu0026amp;ref_=as_li_ss_tlu0022 target=u0022_blanku0022 rel=u0022noreferrer noopener nofollowu0022u003eadjustable wrenchu003c/au003e and try to unscrew the showerhead by twisting it clockwise and you will notice the showerhead getting removed.u003cbru003eu003cbru003eFor safety, it is recommended to cover the area with a cloth so that the wrench doesn’t leave any scratches or damage.u003cbru003eu003cbru003eKudos on successfully removing your shower head that is glued on!

Wrap Up On Removing A Shower Head That Is Glued On

The acidic property in lemon works great for removing the glue. As recommended, prepare the solution by mixing lemon juice and hot water and apply to the affected area.

It is also recommended to use acetone remover for dealing with stickiness. Acetone removers are so powerful that they can even dissolve super glue. Besides, Rubbing alcohol is an alternate if you are unable to find acetone remover at your home.

We recommend you thoroughly read the above process and gather all the essentials. It requires good effort, so have patience and take safety measures.

Also, highly recommend you turn off the main water supply to prevent yourself from getting drenched if something goes wrong.

Read More


Leave a Comment